| SPECIFICATION |
DESCRIPTION |
| A-423-66 |
One type of two-component epoxy based finish coat for the aerospace industry. |
| A-932-66 |
A two-component aluminized epoxy enamel. |
| A-A-8 |
Shellac Varnish. |
| A-A-208B |
A marking ink. |
| A-A-344B |
An interior and exterior lacquer. |
| A-A-665D |
A nitrocellulose lacquer. |
| A-A-665E |
A fast dry alkyd enamel. |
| A-A-857B |
A thinner for reducing the viscosity of cellulose-nitrate based dopes and lacquers of the spraying type. |
| A-A-1452B |
An acid, gasoline and oil resistant lacquer formulated for spraying the aluminum surface around storage batteries.
- Type I: #17038 Gloss Black
- Type II: #17875 Gloss White |
| A-A-1546A |
A rubbing varnish. |
| A-A-1558A |
A high opacity, solvent base coating for use in marking bales, crates, boxes, and drums. |
| A-A-2904 |
A mineral spirit, regular and odorless. |
| A-A-2962A |
An exterior grade, semi-gloss alkyd enamel. |
| A-A-3003 |
A very high quality nitrocellulose lacquer. |
| A-A-3054 |
A heat-resisting paint. |
| A-A-3164 |
A low VOC, lusterless and semigloss synthetic resin lacquer. |
| A-A-3165 |
A durable, pigmented, high gloss lead and chromate free lacquer. |
| A-A-59166 |
A non-slip walkway coating for the exterior of aircraft surfaces.
- Type I: Smooth, no grit
- Type II: Grit added |
| A-A-59281 |
A cleaning compound of solvent mixtures.
- Type I: Normal blend
- Type II: Non-photochemically reactive blend |
| AMS-3170 |
One type of specially blended solvent specially formulated for the reduction of Graphite Varnish Coating. |
| Boeing BMS 10-11 |
Epoxy primer.
- Type I, Class A, Grade A |
| C-1178-66 |
C-1178-66 type converter is an amine based catalyst. |
| DC6571-805 |
High heat aluminum coating. A silicone coating designed to withstand temperatures of up to 1500degrees F without failure. |
| DOD-E-24607A |
A government specification, non-flaming enamel. |
| DOD-P-15328D |
A two-component metal pretreatment wash primer. |
| MIL-A-6091 |
A specification denatured alcohol solvent. |
MIL-C-450C
MIL-C-450 |
A bituminous, asphalt solvent type coating for application on the interior surfaces of ammunition. |
MIL-C-8514C
MIL-C-8514 |
A metal pretreatment wash primer. |
MIL-C-22750D
MIL-C-22750 |
A two-component epoxy-polyamide coating. |
MIL-C-22750F
MIL-C-22750 |
A two-component, hi-solids, low-VOC, epoxy-polyamide coating. |
MIL-C-27725B
MIL-C-27725 |
A corrosion preventive coating for aircraft integral fuel tanks.
Superseded to SAE-AMS-C-27725 . |
SAE-AMS-C-27725
AMS-C-27725 |
Corrosion preventative, polyurethane for aircraft integral fuel tanks for use to 250 Deg. F. |
MIL-C-38736B
MIL-C-38736 |
A cleaning compound of solvent mixtures.
- Type I: Normal blend
- Type II: Non-photochemically reactive blend. |
MIL-C-46168D
MIL-C-46168 |
A two-component, hi-solids aliphatic, CARC polyurethane coating. |
MIL-C-81773C
MIL-C-81773 |
A two-component polyurethane coating. |
MIL-C-83231A
MIL-C-83231 |
A rain erosion-resistant polyurethane coating. |
MIL-C-83286B
MIL-C-83286 |
A two-component, isocyanate/polyester polyurethane coating. |
MIL-C-85285C
MIL-C-85285 |
A two-component aliphatic, polyester polurethane coating. |
MIL-DTL-15090D
MIL-DTL-15090 |
A light gray equipment enamel for use as a topcoat on equipment. |
MIL-DTL-24441C
MIL-DTL-24441 |
A two-component epoxy polyamide paint. |
| MIL-DTL-24631 |
An exterior grade polyester urethane paint.
- Type I: Epoxy
- Type II: Polyurethane |
MIL-DTL-53039B
MIL-DTL-53039 |
Aliphatic polyurathane, single component, chemical agent resistant coating.
- Type I: Maximum of 420 grams/liter
- Type II: Maximum of 180 grams/liter |
| MIL-DTL-64159 |
Water dispersible aliphatic polyurethane, chemical agent resistant coating.
- Type I: Silica-based flattening agents
- Type II: Polymeric flattening agents |
MIL-E-5558A
MIL-E-5558 |
A bake dry, alkyd base, wrinkle finish enamel. |
MIL-E-7729B
MIL-E-7729 |
A high grade, single component, air dry, high gloss alkyd enamel. |
MIL-E-11195E
MIL-E-11195 |
A fast drying, lusterless, low VOC alkyd enamel. |
MIL-E-15090C
MIL-E-15090 |
A general purpose enamel. |
MIL-E-15145E
MIL-E-15145 |
A zinc dust pigmented enamel. |
MIL-E-16663A
MIL-E-16663 |
A rapid, air-drying and baking type enamels for production line application.
- Type I: Air dry
- Type II: Baking
- Class 1: Rapid drying
- Class 2: Flash drying |
MIL-E-22118B
MIL-E-22118 |
A synthetic insulating enamel for use on electric equipment. |
MIL-E-24635B
MIL-E-24635 |
An air-dry, silicone enamel. |
MIL-E-52798A
MIL-E-52798 |
A camouflage alkyd enamel. |
MIL-E-52891B
MIL-E-52891 |
A zinc phosphate type quick-dry lusterless enamel. |
MIL-L-296B
MIL-L-296 |
A lacquer. |
| MIL-L-6805 |
A nitro-cellulose lacquer. |
| MIL-L-7178 |
A nitro-cellulose lacquer. |
MIL-L-10287B
MIL-L-10287 |
A cellulose nitrate lacquer. |
MIL-L-11195D
MIL-L-11195 |
A lusterless hot spray lacquer. |
MIL-L-19537C
MIL-L-19537 |
A gloss acrylic nitrocellulose lacquer. |
MIL-L-19538C
MIL-L-19538 |
A nitrocellulose camouflage lacquer. |
MIL-L-52043C
MIL-L-52043 |
A cellulose nitrate semigloss lacquer. |
MIL-L-81352A
MIL-L-81352 |
An exterior acrylic lacquer for protection of metal surfaces. |
MIL-PRF-81352
MIL-PRF-81352B
MIL-PRF-81352C |
General coatings for use on aircraft and support equipment.
- Type I: Acrylic base
- Type II: Alkyd base
- Type III: Polyurethane base |
MIL-P-8585A
MIL-P-8585 |
A low-moisture sensitivity, corrosion-inhibiting zinc chromate primer. |
MIL-P-14105D
MIL-P-14105 |
A heat-resisting paint intended for use on steel that provides excellent protection. |
MIL-P-15328D
MIL-P-15328 |
A metal pretreatment wash primer. |
MIL-P-21035B
MIL-P-21035 |
A two part, high zinc dust content, galvanizing repair compound. |
MIL-P-21563B
MIL-P-21563 |
A high visibility, durable, exterior, fluorescent paint system. |
MIL-P-21600A
MIL-P-21600 |
A high visibility, durable, exterior, fluorescent paint system. |
MIL-P-23377F
MIL-P-23377G
MIL-P-23377 |
A two-component, low VOC, high build, strontium chromate type epoxy-polyamide primer.
- Type I, Class C: Yellow
- Type II, Class C: Dark Green |
MIL-P-24441A
MIL-P-24441 |
A heavy duty two component epoxy primer |
MIL-P-26915B
MIL-P-26915 |
A lead-free, high-solids zinc-dust primer for steel surfaces. |
| MIL-P-46105 |
A single package, heat convertible/curing epoxy-based, zinc-rich primer. |
MIL-P-52192B
MIL-P-52192 |
A two-component, air-drying or baking, chemical resistant epoxy primer. |
MIL-P-53022A
MIL-P-53022 |
A lead and chromate free, corrosion-inhibiting, epoxy coating primer. |
MIL-P-53022B
MIL-P-53022 |
A two component, flash dry, corrosion inhibiting lead and chromate-free epoxy primer. |
MIL-P-53030A
MIL-P-53030 |
A two component, air dry, water reducible epoxy type primer for ferrous and non-ferrous metals. |
MIL-P-85582D
MIL-P-85582 |
A two component, waterborne high-solids epoxy primer.
- Type I: Standard #34151 Green
- Type II: Low infrared reflective #34052 Green
- Class C2: Chromate rust inhibitor formulation
- Class N: Non-chromate rust inhibitor formulation |
| MIL-PRF-680 |
A degreasing solvent. |
MIL-PRF-3043C
MIL-PRF-3043 |
A thermosetting resin coating for surfaces of engine components and metal parts. |
MIL-PRF-22750F
MIL-PRF-22750 |
A high-solids epoxy coating. |
MIL-PRF-23377G
MIL-PRF-23377H
MIL-PRF-23377 |
A two component, low VOC, epoxy-polyamide primer.
- Type I, Class C: Yellow
- Type II, Class C: Dark Green |
| MIL-PRF-23377J |
Corrrosion inhibiting, chemical and solvent resistant, solvent-borne, high-solids epoxy primer coating.
- Type I: Standard pigments
- Type II: Low infrared reflective pigments
- Class C2: Strontium chromate based corrosion inhibitors
- Class N: Non-chromate based corrosion inhibitors |
MIL-PRF-24635C
MIL-PRF-24635 |
A high grade copolymerized silicone alkyd semigloss enamel. |
MIL-PRF-26915D
MIL-PRF-26915 |
Primer coating |
MIL-PRF-81352B
MIL-PRF-81352C
MIL-PRF-81352 |
General coatings for use on aircraft and support equipment.
- Type I: Acrylic base
- Type II: Alkyd base
- Type III: Polyurethane base |
MIL-PRF-85285C
MIL-PRF-85285 |
A two component aliphatic, polyester polyurethane coating. Superceded to MIL-PRF-85285D |
MIL-PRF-85285D
MIL-PRF-85285 |
A two component aliphatic, high solids, low VOC, polyester polyurethane coating. |
MIL-PRF-85582C
MIL-PRF-85582D
MIL-PRF-85582 |
A two component waterborne epoxy polyamine primer.
- Type I: Standard #34151 Green
- Type II: Low infrared reflective #34052 Green
- Class C2: Chromate rust inhibitor formulation
- Class N: Non-chromate rust inhibitor formulation |
MIL-R-3043B
MIL-R-3043 |
A thermosetting resin coating for surfaces of engine components and metal parts. |
MIL-T-19544E
MIL-T-19544 |
One type of specially blended solvent. |
MIL-T-19588A
MIL-T-19588 |
A toluene/methyl ethyl ketone mixture solvent. |
MIL-T-81772B
MIL-T-81772 |
- Type I: Polyurethane thinner
- Type II: Epoxy thinner
- Type III: Lacquer and alkyd thinner |
MIL-V-173C
MIL-V-173 |
An air dry, moisture and fungus resistant clear gloss varnish. Protects and insulates. |
MIL-V-12276D
MIL-V-12276 |
A baking type, pigmented, semi-transparent phenolic varnish. |
MIL-V-13811D
MIL-V-13811 |
An electrical ignition waterproofing varnish. |
MIL-V-21064A
MIL-V-21064 |
A baking type finishing varnish. |
MIL-W-5044C
MIL-W-5044 |
A non-slip walkway coating with non-skid properties.
- Type I: Smooth, no grit
- Type II: Grit added |
| P-415A-66 |
A two component chemically cured coating. |
| T-120-66 |
One type of thinner-reducer for pre-treatment wash primers. |
| T-262A-66 |
One type of specially blended solvent specially formulated for the reduction of two component epoxy coatings. |
| TT-E-485F |
A semigloss rust inhibiting enamel. |
TT-E-489G
TT-E-489H
TT-E-489J |
A high grade, high gloss alkyd enamel. |
| TT-E-490E |
A high grade silicone alkyd type copolymer gloss and medium gloss enamels. |
| TT-E-496B |
A heat resisting enamel. |
| TT-E-515A |
A quick dry, lusterless, alkyd enamel. |
| TT-E-516A |
A quick dry, lusterless, styrenated alkyd enamel. |
TT-E-527C
TT-E-527D |
An exterior grade, lusterless alkyd enamel. |
| TT-E-529G |
A semi-gloss, alkyd enamel. |
| TT-I-735 |
Grade A, isopropyl alcohol. |
| TT-L-20A |
A nitrocellulose lacquer. |
| TT-L-32A |
A very high quality nitrocellulose lacquer. |
TT-L-50E
TT-L-50G |
A high grade lacquer coating. |
| TT-L-54C |
An acid resistant spraying lacquer. |
| TT-L-58E |
A very high quality nitrocellulose lacquer. |
| TT-N-95B |
An aliphatic naphtha solvent |
| TT-P-28G |
A ready mixed, high heat coating formulated with silicone resin. |
| TT-P-38E |
An air dry, ready mixed aluminum coating. |
| TT-P-320D |
An aluminum pigment in powder or paste. |
| TT-P-636D |
An alkyd primer coating. |
| TT-P-641G |
A two part, high solids, zinc dust, zinc oxide primer. |
| TT-P-645A |
A corrosion inhibiting, zinc chromate primer. |
| TT-P-645B |
A zinc molybdate alkyd primer. |
TT-P-664C
TT-P-664D |
A synthetic, rust inhibiting, lacquer resisting primer coating. |
| TT-P-1757A |
A low moisture sensitivity, corrosion inhibiting zinc chromate primer. |
| TT-P-1757B |
A one component, alkyd base, corrosion inhibiting zinc chromate primer. |
| TT-P-2756A |
A low VOC, self priming, polyurethane coating. |
| TT-T-266D |
A thinner for cellulose-nitrate based dopes and lacquers. |
| TT-T-291F |
Mineral Spirits. |
| TT-T-360E |
A type of synthetic resin enamel thinner. |
| TT-T-548F |
Toluene |
| TT-X-916B |
Thinner primarily for use in protective coatings. |
